Support&troubleshooting   Report a bug


About the Report a bug category (2)
Inventure giving error #152 to load cartridge with Z Nylonn (4)
Save as not working (5)
M200 plus - Z axe not moving during print (2)
Calculator .......? (2)
Part is missing if selecting Z-ASA PRO (4)
Extrusion temperature (2)
M300 Dual Camera connection issue (14)
06 Nozzle not seen (5)
Problème lors de la mise en veille de la M200plus (2)
Layer shift M200 Plus (4)
STL-file reading error (7)
M300 Dual X and Y endstop error message (1)
M300 Dual Platform autoleveling failure (1)
Z-suite black out (8)
Z-SUITE 2.12 Infill bug (2)
Supports - a bug and a feature request (4)
Z-suite Blurry UI (5)
M200 Plus - ANNOYING BUGS in Firmware 2.0.0 ( 2 ) (23)
Z-Suite 2.11.1.0 - Uneven layer infill and 1st Layer density not changing (4)
Zortrax m200 no retraction in Z-Suite 2 (15)
Possible Z-Suite 2.11 infill Bug (6)
Z-Suite 2.10.3.0 First Layer Gap missing (M300 Dual) (2)
I got old filament and have moisture (4)
Repairing File 2.10.2.0 (2)
Z-Suite 2.9.0 top layers with incorrect outer dimensions (6)
Fan speed incorrect (4)
Z Suite for M300 not changing materials after software update (3)
The additional exposure time is not taken into account (4)
Inkspire support generation bug (2)