M300 Plus Screen Blank


Did Any body faced the M300 Plus Screen Blank problem.
After Power ON screen goes into blank screen.
We are predicting it is after the software update to latest on.



Can you record a video showing how the device boots up? Do you hear any sound then (for example the bottom fine), or the printer does not react at all? Also, does the LED strip inside the printer show any colour?

Best regards,


I am having this problem after updating to 2.1.4 but at random times including boot up, during printing, loading filament and during just idling.


Hi, I m having the same problem:

Video: https://mega.nz/file/ThNSWYrZ#uHXMkLIkqtUJmzWLrteGeSomXMH0MvPndqLwy4IwwEY

What could it be?

The firmware versione is 2.2.4


I was having the same problem,. Just confirm remove the USB connection cable from Main display board. if that resolves the issue I will suggest further procedure .



Please remove the USB and WiFi dongle (if your printer has the external port) - does the same thing happen when you turn the printer on then?

It would be good to check the connections on the motherboard and Android PCB - as Rahul suggested, check the LCD cable connecting the motherboard with the Android. Also, make sure the screw securing the LCD transfer board (on the motherboard) is tight.

If there is no result - contact either your reseller or reach our support department via support form. We will provide further help then.

Best regards,


Thanks Karolina, I solved. The problem was the WiFi dongle, when I removed it from motherborad the printer has started working again. Zortrax should provide a better WiFi dongle. XD


thanks for suggestion



I am glad to hear you found a root of the problem. Just to make sure - what exactly did you remove from the motherboard? As the WiFi dongle is located at the side of the device.

Best regards,


I have the same issue. When I restart the machine it does it and after many tries like +5 it sometimes comes back. I will try pulling the wifi dongle on the side.



If you are still facing the issue - please contact your reseller or fill in the support form so we can provide further help.

Best regards,