Now you know why I needed red Z-ABS

For the wife.

https://www.dropbox.com/s/ybid2ocm98r8g53/Photo%20Feb%2011%2C%205%2025%2048%20PM.jpg

David

David, that looks real nice. Did you print this stem up or down, with or without support? Oh, and would you mind sharing the stl or link?

Thanks, Dhatw.[quote name=Winstonc]For the wife.

https://www.dropbox.com/s/ybid2ocm98r8g53/Photo%20Feb%2011%2C%205%2025%2048%20PM.jpg

David
[/quote]

Orange is kind of Red’ish

http://www.flickr.com/photos/113625867@N06/sets/72157639828831673/

But together with next batch of ABS we should manufacture red.

Best Regards

Yeah, red is good for hearts too… :wink:

[quote name=dhatw]David, that looks real nice. Did you print this stem up or down, with or without support? Oh, and would you mind sharing the stl or link?

Thanks, Dhatw.[quote name=Winstonc]For the wife.

https://www.dropbox.com/s/ybid2ocm98r8g53/Photo%20Feb%2011%2C%205%2025%2048%20PM.jpg

David
[/quote]

[/quote]

Stem up, no support, printed in two pieces.

Here’s the link

http://www.thingiverse.com/thing:84075

[quote name=Winstonc][quote=dhatw]David, that looks real nice. Did you print this stem up or down, with or without support? Oh, and would you mind sharing the stl or link?

Thanks, Dhatw.[quote name=Winstonc]For the wife.

https://www.dropbox.com/s/ybid2ocm98r8g53/Photo%20Feb%2011%2C%205%2025%2048%20PM.jpg

David
[/quote]

[/quote]

Stem up, no support, printed in two pieces.

Here’s the link

http://www.thingiverse.com/thing:84075
[/quote]

Thanks you.

[quote name=Winstonc]For the wife.

https://www.dropbox.com/s/ybid2ocm98r8g53/Photo%20Feb%2011%2C%205%2025%2048%20PM.jpg

David
[/quote]
Hey David… Get some red paint. Make sure it’s for plastic though. I use Krylon Fusion. Works great. I’ll print a small one and paint it so can see what it looks like.

Yes I could do that. The Zortrax team have promised some red in the next batch of ABS

I am about to print the stem at 1.1x size and then do the same with the rose overnight. I picked 1.1x because at 100% size I noticed some gaps in the petals.

[quote name=Kyle][quote=dhatw]Hey Winstonc, I started a thread to see if anyone else had the issues that I did with this print. Did you print this full size? I got a lot of stringing at 50% size.

https://www.dropbox.com/sh/7jbmvzktiyertzt/F0HczMxnBu

Dhatw.
[/quote]
Are you using latest firmware and Zsuite?
[/quote]

Yep, I am always on the newest s/w and f/w as soon as it is published.

Ok… Printed these today and just got done painting. Painted small one first to see how it looked. 100% 75% 50%

Mrs. Kyle should be happy :slight_smile:

I hope so!! I spent 8.5 hours on these… Just drew up a heart vase to go with them. :smiley:

At least some guys know how to treat a lady. For Christmas my hubby gave me… a sandblasting cabinet :rolleyes:

You are one lucky lady!!! Do you use it? :smiley:

Lol! A Sandblasting Cabinet, that’s awesome, he should have really sealed the deal and filled it with stuff you like for after work, ike a foodmixer or some new pans!

Ok, feel free to kick me anytime…

~A

@Kyle, nope, Julia doesn’t use it, as it makes too much of a mess. (from an earlier post)

[quote name=Julia Truchsess]At least some guys know how to treat a lady. For Christmas my hubby gave me… a sandblasting cabinet :rolleyes:
[/quote]

Obviously, we don’t know you very well, but I have a hard time believing you’d prefer flowers over a sandblasting cabinet. :stuck_out_tongue:

In a way I guess it was kind of sweet and thoughtful, but honestly I have no place to put it, i don’t want the dust/mess in my office, and frankly would have preferred something a bit more romantic.

Maybe roses AND a sandblasting cabinet? :wink: