Print marks

Hi Guys! I have been printing great 3x6 inches prints without any problems.

However, recently, on some prints the model comes out with a few "imperfections". Im not sure if the extruder is clogging on mid print... I have tried with different wall thickness and the issue appears every time now.

Probably on a 3x6 cylinder I find 7 or 8 of these imperfections.

I hope you can help me discover the issue....

0.19 mm layer

Z-ABS

Hello,

Please contact our customer support team regarding this issue: http://support.zortrax.com/application-form/

Hi Chris,

Thanks for the response. I have already filled out the support form.

Is there any maintenance I should apply to the printer?

I have only had it for a couple of weeks and have not given any maintenance....

Ive seen a lot of posts of cleaning the extruder with acetone or similar...

Any further info is appreciated!

thanks!

Is there any maintenance I should apply to the printer?

I have only had it for a couple of weeks and have not given any maintenance....

Definitely try the XY maintenance procedure and some lubrication.

Definitely try the XY maintenance procedure and some lubrication.

He should just send .stl file to Zortrax support or here to check if this is not software issue