Although this pendant shade prototype printed quite well on the exterior surface, is there a remedy for this texture on the interior? Banding with discernible ridges that aren't present in the model or evidenced in the Z-Suite upon saving the code.
https://dl.dropboxusercontent.com/u/18226480/Seascape/Zortrax/Globe1_1.jpg
https://dl.dropboxusercontent.com/u/18226480/Seascape/Zortrax/Globe1_2.jpg
This was printed at .19mm, 30°, Full, 20% Fan.
Currently printing another at .14mm, 45°, Full, 80% Fan… with the same result.
The wall thickness is .103" .
https://dl.dropboxusercontent.com/u/18226480/Seascape/Zortrax/Globe_1_180.stl
Any tips would be greatly appreciated.