diameter of the nozzle

Zortrax M200 General Discussion
#1

In Z-Suite 2,7,1, we can choose the diameter of the nozzle : 0,3mm or 0,4mm or 0,6mm.

But it is very difficult to find other nozzles in other diameters and adapted to Zortrax.

 

Maybe for the M200 but certainly not for the M200plus.

 

What happens if we choose the 0.3mm nozzle while the printer is equipped with a 0.4mm nozzle ?

#2

Printing settings are different for each nozzle diameter. Thus, if the model is prepared for 0,3 nozzle and the diameter of the installed nozzle is 0,4 - some quality problems may occur.

#3

Hello Marek !

Please, where can I buy nozzles 0.3mm for the Zortrax M200?

 
greetings
 
Wolfgang
#4

Hello Marek !

Please, where can I buy nozzles 0.3mm for the Zortrax M200?

 
greetings
 
Wolfgang

We've decided to implement this option for customers who would like to use external nozzles. I believe you'll find such nozzles somewhere on the web. I bet someone from our community will be able to help you as well.

#5

Thanks Marek for the quick answer!

 
Please, can someone give me a reference source for a suitable nozzle (M200) with 0.3mm?
 
Thanks and best regards !
 
Wolfgang
#6

I have only one link here : accessories Z-Temp in Europa : https://www.machines-3d.com/imprimantes-3d-accessoires-materiel-entretien-xsl-364_370.html?page=2

but i dont know if you have to buy also the extruder Z-Temp

#7

I have only one link here : accessories Z-Temp in Europa : https://www.machines-3d.com/imprimantes-3d-accessoires-materiel-entretien-xsl-364_370.html?page=2

but i dont know if you have to buy also the extruder Z-Temp

Thank you and Greetings !

Wolfgang

#8

Julia (from this forum) sells nozzles as well, in 0.3, 0.4, and 0.5 mm diameters:

http://www.z-temp.co/store.html#!/Nozzle/p/66037206/category=0

#9

Julia (from this forum) sells nozzles as well, in 0.3, 0.4, and 0.5 mm diameters:

http://www.z-temp.co/store.html#!/Nozzle/p/66037206/category=0

Thank you !