Poly Tiger by Zortrax

[pioo]

Hi :)

http://www.thingiverse.com/make:79637

Filament: 

Sky Blue Z-ABS

Printing Parameters: 

Layer Height: 0,14mm 

Infill: Medium 

Support: 30° 

Fan: 0%

 

Printing time: 10h 15min

 

Foto hight resolution :

 

https://dl.dropboxusercontent.com/u/19671723/Zortrax/Poly%20Tiger/Zdj%C4%99cie%2031.05.2014%2C%2010%2024%2044.jpg

https://dl.dropboxusercontent.com/u/19671723/Zortrax/Poly%20Tiger/Zdj%C4%99cie%2031.05.2014%2C%2010%2037%2039.jpg

https://dl.dropboxusercontent.com/u/19671723/Zortrax/Poly%20Tiger/Zdj%C4%99cie%2031.05.2014%2C%2010%2037%2049.jpg

https://dl.dropboxusercontent.com/u/19671723/Zortrax/Poly%20Tiger/Zdj%C4%99cie%2031.05.2014%2C%2010%2037%2058.jpg

https://dl.dropboxusercontent.com/u/19671723/Zortrax/Poly%20Tiger/Zdj%C4%99cie%2031.05.2014%2C%2010%2038%2005.jpg

https://dl.dropboxusercontent.com/u/19671723/Zortrax/Poly%20Tiger/Zdj%C4%99cie%2031.05.2014%2C%2010%2038%2017.jpg

https://dl.dropboxusercontent.com/u/19671723/Zortrax/Poly%20Tiger/Zdj%C4%99cie%2031.05.2014%2C%2010%2038%2054.jpg

[RobertKamieniarz]

nice