Hi
After many attempt i have allways some problem with articulated parts from thingverse, i have try default and tweaked setting with ABS, ABSv2, Glass, ultra original zortrax.
How to prevent this please ?
Br
Problem with thingiverse flexi model
Marcin_R
#3
Hi @alkabal!
I see you’re printing using different materials for raft and for the actual model.
Could you explain what’s the actual problem here?
Kind regards,
Marcin
alkabal
#4
JHi
The problem is not from raft with different material and I have also do first layer with same color The result is beautiful especially the neon green !
The problem is too tiny gap for the articulated portion resulting in a not flexible model
For this model I have do some pause and using knife For increase gap I have save the print
The most problematic are with z-glass and abs resulting in a fixed model.
Br
alkabal
#5
Except that the print quality is really good but unperfect as you can see on the head for this model with abs
Actually printing with Z-nylon resulting in a beautiful external aspect but many angel hair on the internal parts
Br
Hi,
Did you resize the model with articulated parts? Please leave a default size and run a test print.
As for Z-NYLON - you can remove the strings with a heat gun. Also, remember that Z-NYLON is a demanding material in terms of storage and printing process conditions - have a look at the tips for printing with this material.
As for the other models - they might be a bit overheated. You might try increasing the fan speed while printing smaller models, but note that Z-NYLON is highly prone to warping.
Best regards,
Karolina
alkabal
#10
Hi
thanks a lot for reply
Lion and cat are default size dimension.
But yes brachiosorus you are right i have increase the size before print.