Scraper with dented edges causing damage to print bed perf board

I struggled to find one that only had a bevel on one side. Most were double sided.

This looks a lot like the Up one...

http://www.alibaba.com/product-detail/Amico-3-Width-Rubber-Plastic-Grips_60145442612.html

I think you may need to look for a "putty knife" rather than a scraper. Looks to me like putty knives by definition have only one beveled side.

http://www.amazon.com/Titan-17000-Scraper-Putty-Set/dp/B000VKDM1S/ref=sr_1_11?ie=UTF8&qid=1421986272&sr=8-11&keywords=putty+knife

This looks a lot like the Up one...

http://www.alibaba.com/product-detail/Amico-3-Width-Rubber-Plastic-Grips_60145442612.html

That's great and all, but I don't think I need 2400 of them... (minimum order) LOL... ;) :D

I think you may need to look for a "putty knife" rather than a scraper. Looks to me like putty knives by definition have only one beveled side.

http://www.amazon.com/Titan-17000-Scraper-Putty-Set/dp/B000VKDM1S/ref=sr_1_11?ie=UTF8&qid=1421986272&sr=8-11&keywords=putty+knife

Hmmm.. Maybe not.. It says it comes with one scraper and two putty knifes.. I only see one bevel.. I've been all over Ebay.. Maybe we need to just ask for original supplier.. (or what they looked for) :D

I think you may need to look for a "putty knife" rather than a scraper. Looks to me like putty knives by definition have only one beveled side.

http://www.amazon.com/Titan-17000-Scraper-Putty-Set/dp/B000VKDM1S/ref=sr_1_11?ie=UTF8&qid=1421986272&sr=8-11&keywords=putty+knife

Putty knife, spatula and scraper are synonyms.

But... if you wanna be picky maybe you'll need a beveled blade to scrape but not really to apply putty.

Looks like McMaster-Carr might have something that would work and their products are usually pretty high quality:

http://www.mcmaster.com/#paint-scrapers/=vlgrde

They don't ship outside the US though.

maybe set up with someone in the US to buy it and reship it to you when they get it.

Looks like McMaster-Carr might have something that would work and their products are usually pretty high quality:

http://www.mcmaster.com/#paint-scrapers/=vlgrde

They don't ship outside the US though.

Yeah, this one looks a lot like the one I got from Zortrax..

http://www.mcmaster.com/#paint-scrapers/=vlh23g

I'll try to order one or two scrapers from McMaster-Carr on my next order and report back when they arrive.

Mike

How can you fix the perf board ?