There is no possibility to choose a nozzle except 0.4

Zortrax M300 General Discussion
1

hello, I have a 0.6mm nozzle, there is no way to choose a nozzle except 0.4 in the slicer. Tell me how to be.

2

Hello,

unfortunately M300 Printer has no profiles suited for the 0,6 nozzle.

They are available for some of the profiles in the Plus series printers.

Best Regards

3

I have m300 dual and m200 plus, 0.6 nozzles won’t work on them either?

4

Hello PojiloyUdav,

As I wrote before, our PLUS series along with the M300 Dual, has the 0.6 nozzle option to use in Z-Suite.

For example here is a list where you can set 0.6 Nozzle in Z-Suite for M300 Dual:

-Zortrax Materials Dual:
Z-ABS
Z-GLASS
Z-NYLON
BASF ULTRAFUSE PAHT CF15

-Zortrax Materials Single:
Z-ABS
Z-GLASS
Z-HIPS
Z-PETG
Z-ULTRAT
Z-ULTRAT PLUS
Z-ASA PRO
Z-NYLON
Z-PLA
BASF ULTRAFUSE PP GF30
BASF ULTRAFUSE PP CF15

-External Materials Dual:
GLASS-TYPE
NYLON-BASED
PAHT CF15-BASED

-External Materials Single:
ABS - Based
GLASS - Based
HIPS - Based
PETG - Based
ULTRAT - Based
ULTRAT PLUS - Based
ASA PRO - Based
NYLON - Based
PLA - Based
PP GF30 - Based
PP CF15 - Based

Best Regards

5

ty got it, you helped me a lot

1 Like