Trying to print Z Nylon with M300 Dual


#1

Hello there, we failed 7 or 8 prints in a row trying to print a very simple extruded shape with the certified Zortrax Z Nylon. We are using the latest suite and the latest firmware. We tried with the perforated bed and with the glass bed. We purchased and tried 4 different glues ( vision minor, magic goo, and two other brands). Basically, we experienced bed adhesion problems, meaning that we couldn’t have even the first layer finished and we have been feeling very frustrated. Thank you for your help.


#2

Hi!

Z-Nylon is highly prone to warping. It is required to use the HEPA cover and side covers.

Do you have the HEPA cover?

By the way, please send me the zcodex of the model you’re trying to print with Z-Nylon. I’ll check if everything is ok with it software-wise.

Kind regards


#3

I’ll search for the model and yes we always print with Hepa Cover and side doors


#4

Hello Marcin, this is the file that we attempted to print many times with hepa cover on and doors installed. Thank you for your help.

arri dovetail 2.zcodex (556.5 KB)


#6

Hi!

Thanks for the zcodex.
I’ll contact you via PM about the results of my tests.

Kind regards,


#7

Ok Marcin, I’ll waif for it. Thanks