Z-SUITE 2.3.1 BETA and 1.13 released!

News Software/firmware updates
1

Hello Everyone! 1f642.png:)

We've just released Z-SUITE 1.13 and Z-SUITE BETA 2.3.1 (https://support.zortrax.com/downloads/software/). 

Both versions: 

Support Z-ULTRAT Plus (Inventure) 

Support Z-SEMIFLEX (Inventure) 

Introduce new Layer Thickness for Z-HIPS - 0.09 (M Series printers)

Introduce new Layer Thickness for Z-ULTRAT - 0.29 (M200)

Introduce new Layer Thickness for Z-ASA Pro - 0.09 (M Series printers)

Introduce Shell infill for PLA-based materials (External Materials)

Due to those changes, we've also added new Firmware for Zortrax Inventure (https://support.zortrax.com/downloads/firmware/…).

Answering your questions in advance - we're still working on introducing Z-SUITE BETA for Mac OS and we're doing all we can to do it as soon as possible. Thank you for your patience.

2

Couple of problems i am having with Z-Suite:   https://youtu.be/5ludzDassOs

3

Thumbs up on the .29 res on the UltraT! Thank you! I was going to request that, now I wont have to.

4

So what are the differences between Z-Suite 1.13 and 2.3.1 Z-Suite Beta?

5

Couple of problems i am having with Z-Suite:   https://youtu.be/5ludzDassOs

Hi Andy,

Yeah, we're aware of the problem. Sorry about that. 

We're working on it. 

6

Thank you for the new Release!

It would be nice to have a Preset of your own printer.

Everytime when i start a new Tab (New Project) it's frustrating to select your own Printer.

Because i want just to start a new Tab, and do a drag and drop of the 3d file.

It would be nice to save the standard Printer and if you want a other one, you have the option in the left corner: that's enough if you ask me :).

Thank you!

7

Hello Everyone! 1f642.png :)

We've just released Z-SUITE 1.13 and Z-SUITE BETA 2.3.1 (https://support.zortrax.com/downloads/software/). 

Introduce new Layer Thickness for Z-HIPS - 0.09 (M Series printers)

Sweeeeet

8

So what are the differences between Z-Suite 1.13 and 2.3.1 Z-Suite Beta?

The improvements applied in the Z-SUITE 2.3.1 and in the version 1.13 are the same.

Most of all, the interface looks different and you have control over the percentage of infill in the latest update. In 1.13 you can choose between Maximum, High, Medium, Low, Mesh, Shell.

9

Thank you for the new Release!

It would be nice to have a Preset of your own printer.

Everytime when i start a new Tab (New Project) it's frustrating to select your own Printer.

Because i want just to start a new Tab, and do a drag and drop of the 3d file.

It would be nice to save the standard Printer and if you want a other one, you have the option in the left corner: that's enough if you ask me :).

Thank you!

I see the point.

Thanks.

10

Dear Marcin,

for courtesy,I installed windows 7 professional service pack 1 on a new ssd hard drive,

installed the Z-suite 2 version does not open the program interface:

are there any particular configurations for software compatibility ?

thanks

11

Dear Marcin,

for courtesy,I installed windows 7 professional service pack 1 on a new ssd hard drive,

installed the Z-suite 2 version does not open the program interface:

are there any particular configurations for software compatibility ?

thanks

done !! solved, now it works !!!

a Windows 7 professional update was not installed correctly (net framework 4.7.1)