Z-suite can't process manually made infills?

Z-SUITE/Firmware
1

Hello,

So Im playing around with custom made infills and it seems that as soon as my mesh is closed, the suite wont print whatever I have inside the mesh no matter what setting I choose.

Infill_Zortrax
Infill_Zortrax935×522 28 KB

Infill_Zortrax-02
Infill_Zortrax-021048×569 38.1 KB

Another problem that I had is the setting for the wall thickness stop at 3 and I wanted to test thicker wall thickness but I can’t if the mesh is closed it take my own wall thickness.

Infill_Zortrax-03
Infill_Zortrax-03992×698 53.6 KB

Infill_Zortrax-04
Infill_Zortrax-04936×599 61.1 KB

Any ways to circumvent that problem ?

2

Hi @pmainc,

could you provide the .stl file, so we can have a look?

Best regards
Karolina

3

You can take any cubes and put shapes in it, if its closed the printer will erase whatever is inside, ignore it and put its own supports.

Test_Support_Interne.stl (2.0 KB)