Hello!
I have a Zortrax M200 and I have run into an error ever since replacing my hotend. The error is that the bed keeps crashing against the hotend, it doesn’t stop moving upwards. I’m not sure what’s wrong, help would be greatly appreciated.
Edit: When heating the percentage of how hot the bed is changes a lot.
Regards,
Tobias
Hi @TobiasB
You can troubleshoot most of the problems with hotend crashing into a platform by following this manual.
If the issue persists, please provide us with version of printer’s firmware and the Z-Suite version.
Hi @DamianZortrax
I have started troubleshooting by following the manual you provided and i got up to step 6 and it returns 0.8V so now i’m going onto the platform maintenance. I will let you know how that goes.
Awesome.
Let me know how it goes.
Hi Damian,
I did the platform maintenance and it still didn’t fix my problem, it still continues going up. It also started smoking which i don’t think is the best.
I’m using Z-suite 2.32.0.0, and firmware is 1.3.1