Zortrax M300 Plus is here!


#1

Hi Folks,

Many of you have been waiting for it  :)

Meet Zortrax M300 Plus together with HEPA Cover: https://zortrax.com/3d-printers/m300-plus/


#2

Very interesting !

In the photo below, we see the aluminum perforated plate and the heating plate out of the printer : new system to facilitate the extraction of printed objects ?

Or is it the same connector as the M200 +


#3

Ohh, is it possible to remove the plate from the printer for model removal ??


#4

Very interesting !

In the photo below, we see the aluminum perforated plate and the heating plate out of the printer : new system to facilitate the extraction of printed objects ?

Or is it the same connector as the M200 +

Axel,

I'm not sure what you mean. It's a heatbed. Also, the platform can be taken out from the printer.


#5

Axel,

... Also, the platform can be taken out from the printer.

The platform (in order to remove the print piece) could not be found in the M300, or ???


#6

indeed, it was not clear ! :unsure: -_-

I reacted and wrote too fast ! :o

I thought it was a new model of printing plate.

I did not look at the pictures carefully ! This is the same printing plate as the one on the M300

We can close the topic !

:wink:

Sorry !